![]() ![]() ![]() Step 4: Now open Extract Balong_USB_Downloader_1.0.1.10 and E5573cs-323_usbloader, both these in one folder. You should hear a Sound and you will see some hardward is getting installed. Keep both touched with one hand, and with the other connect the device to the PC / Laptop with USB. For this you will need a wire or any metal which can be used to touch the Ground connection to the Boot loader on the board, as shown in the below diagram. Step 3: Now we have to boot shot the device. Leave the Battery inside and Remove the 6 screws and open the front of the device. Step 2: Now turn off your device, by long pressing the Center button, and remove the back cover. We need this information to restore it later as I said it will get errased in the process. ![]() This information will also be present inside the Device behind the battery and on the Box you received the device in. Now open the Web UI in the browser (if it does not auto open 192.168.1.1/html/home.html) Go to Settings (if prompted for ID / Pass, enter admin in both), then go to device settings and make a Note of the IMEI and Serial Number. Once the Default Drivers are installed, run the Huawei-HiLink-Drivers and Mobile Partner Drivers and instal them as well. If the Autorun Option is available, run it and install the softwares. Connect your Device to the PC / Laptop and let the drivers get installed. Step 1: Start your Device by long pressng the button in the center, and both led lights for network and battery will blink green. WINDOWS 8, 8.1 and 10 will give you issues with drivers. Please proceed at your own risk !!!! PLEASE USE ONLY A WINDOWS 7 Machine.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |